Nortel Networks 1000ASE-XD, 1000BASE-SX Appendix E Default settings, Factory default settings

201

Appendix E

Default settings

Table 56 lists the factory default settings for the BayStack 420 Switch according to the console interface (CI) screens and fields for the settings.

Table 56 Factory default settings

Field	Default setting	Appears in this CI screen
BootP Request Mode	BootP Disabled	“IP Configuration/Setup screen” on
		page 94
In-Band Stack IP Address	0.0.0.0
	(no IP address assigned)
In-Band Switch IP Address	0.0.0.0
	(no IP address assigned)
In-Band Subnet Mask	0.0.0.0
	(no subnet mask assigned)
Default Gateway	0.0.0.0
	(no IP address assigned)
Read-Only Community String	public	“SNMP Configuration screen” on
		page 99
Read-Write Community String	private
Trap IP Address	0.0.0.0
	(no IP address assigned)
Community String	Zero-length string
Authentication Trap	Enabled
Link Up/Down Trap	Enabled
sysContact	Zero-length string	“System Characteristics screen” on
		page 100
sysName	Zero-length string
sysLocation	Zero-length string

Using the BayStack 420 10/100/1000 Switch