Nortel Networks 1000ASE-XD Screen fields and descriptions, Press Backspace to delete entered text

Chapter 3 Using the console interface 89

To return to the previous menu, press [Ctrl]-R.

To go to the next screen in a series, press [Ctrl]-N.

To return to the main menu at any time, press [Ctrl]-C.

Press [Backspace] to delete entered text.

Options that appear in brackets (for example, [Enabled]) are user-settable options.

Screen fields and descriptions

Figure 39 shows a map of the CI screens. The remainder of this chapter describes the CI screens and their fields, beginning with the main menu.

Figure 39 Map of console interface screens

Main Menu

IP Configuration/Setup

SNMP Configuration

System Characteristics

Switch Configuration

Console/Comm Port Configuration Identify Unit Numbers1 Renumber Stack Units1 Display Hardware Units Spanning Tree Configuration TELNET Configuration Software Download Configuration File Display Event Log Reset Reset to Default Settings Logout

	MAC Address Security Configuration
	MAC Address Security Port Configuration
MAC Address Table
	MAC Address Security Port Lists
MAC Address-Based Security
	MAC Address Security Table
VLAN Configuration
Port Configuration		VLAN Configuration
High Speed Flow Contro Configuration 2		VLAN Port Configuration
MultiLink Trunk Configuration		VLAN Display by Port
Port Mirroring Configuration
Display Port Statistics
Clear Port Statistics		MultiLink Trunk Configuration
		MultiLink Trunk Utilization

Spanning Tree

Display Spanning Tree Switch Setting

1Only appears when the switch is participating in a stack configuration.

2Only appears when a gigabit MDA is installed in one or more units in a stack configuration.

BS45041F

Using the BayStack 420 10/100/1000 Switch