Chapter 3 Using the console interface 119
Figure 53 MAC Address Security Table screen
Table 19 describes the MAC Address Security Table screen fields.
Table 19 MAC Address Security Table screen fields
Field | Description |
|
|
| |
Find an Address | Allows you to search for a specific MAC address that is used in any of the | |
| MAC Address Security Table screens. | |
|
| |
MAC Address | Allows you to specify up to 448 MAC addresses that are authorized to access | |
| the switch. You can specify the ports that each MAC address is allowed to | |
| access using the Allowed Source field (see next field description). The | |
| specified MAC address does not take effect until the Allowed Source field is | |
| set to some value (a single unit/port number or a port list value that you | |
| previously configured in the MAC Address Security Port Lists screen). You | |
| can clear an existing MAC address field by entering zero (0) in the field and | |
| pressing [Enter]. |
|
| Default | - - - - - (no address assigned) |
| Range | A range of 6 Hex Octets, separated by dashes (multicast1 |
|
| and broadcast addresses are not allowed). |
|
| |
Allowed Source | Allows you to specify the ports that each MAC address is allowed to access. | |
| The options for the Allowed Source field include a single unit/port number or a | |
| port list value that you have previously configured in the MAC Address | |
| Security Port Lists screen. | |
|
|
|
