Nortel Networks 1000BASE-SX describes the Console/Comm Port Configuration screen fields, 209418-A

148Chapter 3 Using the console interface

Figure 68 Console/Comm Port Configuration screen

Table 33 describes the Console/Comm Port Configuration screen fields.

Table 33 Console/Comm Port Configuration screen fields

Field	Description
Comm Port Data Bits	A read-only field that indicates the current console/comm port data bit setting.
Comm Port Parity	A read-only field that indicates the current console/comm port parity setting.
Comm Port Stop Bits	A read-only field that indicates the current console/comm port stop bit setting.
Console Port Speed	Allows you to set the console/comm port baud rate to match the baud rate of the
	console terminal.
	Default Value:		9600 Baud
	Range:		2400 Baud, 4800 Baud, 9600 Baud, 19200 Baud, 38400 Baud
		Caution: If you choose a baud rate that does not match your console
		terminal baud rate, you will lose communication with the configuration
		interface when you press [Enter]. If communication is lost, set your
		console terminal to match the new service port setting.

209418-A