Edimax Technology ES-5224REM, ES-5224RFM, ES-5224RM, ES-3124REM Port Configuration, Flow Control

2.1 Port Configuration

This page can change the status of each port. Press <Space> key to change configuration of each item.

1.InRate(100K/unit): You can set input rate control, per unit is 100K. The valid range is 0~1000.

0: disable rate control.

1~1000: valid rate value.

2.OutRate(100K/unit): You can set output rate control, per unit is 100K. The valid range is 0~1000.

0: disable rate control.

1~1000: valid rate value.

3.Enable: You can disable or enable this port control. “Yes” means the port is enabled, “No” means the port is disabled.

4.Auto: You can set auto-negotiation mode as Auto, Nway_Force or Force of each port.

5.Spd/Dpx: You can set 100/10Mbps speed on port 1~port24; 1000/100/10Mbps speed on port25~port26 (Gigabit Switch), 100/10Mbps speed on port25~port26 (Fast Ethernet Switch) and set full-duplex or half-duplex mode.

6.Flow Control:

Full: Displays the flow control status is enable/disable in full

52