Cisco Systems Cisco AS5300 manual Gather Configuration Information, Ask Your Network Administrator

3Gather Configuration Information

Use this section to help gather and organize the information you need to run the setup script to configure your Cisco AS5300. The information in the table is not an exhaustive list, but provided only as a starting point when using the setup script.

Note If you do not have this information, you can get it from your network administrator.

Item Ask Your Network Administrator Enter the Information in This Column

1.What do you want to name the Cisco AS5300 (to distinguish it from other Cisco devices on your network)?

2.What do you want the encrypted enable secret password to be? (Note: This password cannot be seen when viewing the configuration and therefore is more secure.)

3.What do you want the nonencrypted enable password to be? (This password can be seen when viewing the configuration and therefore is less secure.)

4.What do you want the password for remote console access to be? This is referred to as the virtual terminal password.

5.Do you want to configure the Cisco AS5300 for: SNMP? If so,

•What is the public (read-only) community string?

•What is the private (read-write) community string?

LAT?

AppleTalk?

•AppleTalk multizone networks?

•What are the AppleTalk zone names?

•What are the AppleTalk network numbers? DECNet?

IP?

IGRP routing?

•What is the IGRP autonomous system number? CLNS?

IPX?

•What are the IPX network numbers?

VINES?

XNS?

Apollo?

Bridging?

15