Cisco Systems Cisco AS5300 manual Connect a Modem for Remote Administrative Access Optional

Connect a Modem for Remote Administrative Access (Optional)

To configure the Cisco AS5300 from a remote location, you will need an RJ-45-to-RJ-45 rollover cable and a modem adapter (RJ-45-to-DB-25) for connecting a modem.

If you will not be using a modem to configure the Cisco AS5300 remotely, skip this procedure and go to Connect Power, page 13. Note The cable and adapter are included. The modem is not included.

Step 1 Connect the adapter labeled MODEM to your modem.

Step 2 Connect the RJ-45-to-RJ-45 rollover cable to the adapter.

Step 3 Connect the other end of the RJ-45-to-RJ-45 rollover cable to the port labeled AUX on the rear panel of the Cisco AS5300.

Auxiliary port

(RJ-45)

Universal access server

(labeled AUX)

RJ-45-to-RJ-45 rollover cable

Modem

RJ-45-to-DB-25 adapter

(labeled MODEM)

12