Connect the E1/PRI Card for WAN Access

Warning This equipment is to be installed and maintained by service personnel only as defined by AS/NZS 3260 Clause 1.2.14.3 Service Personnel.

Warning The telecommunications lines must be disconnected 1) before unplugging the main power connector and/or 2) while the housing is open.

Warning The E1 interface card may only be installed in an ACA-permitted customer equipment or a Data Terminal Equipment (DTE) that is exempted from ACA's permit requirements. The customer equipment must only be housed in a cabinet that has screw-down lids to stop user access to overvoltages on the customer equipment. The customer equipment has circuitry that may have telecommunications network voltages on them.

You will need four E1 cables to connect the E1/PRI card to a WAN. The E1 cables and E1 networks terminating units are not included.

Step 1 Connect the single-connector end of the E1 cable to the port labeled PORT 4 on the rear panel of the Cisco AS5300. Step 2 Connect the Rx end of the cable to the Receive port of an E1 networks terminating unit.

Step 3 Connect the Tx end of the cable to the Transmit port of the E1 networks terminating unit. Step 4 Repeats Steps 1 to 3 to connect other cables to the remaining ports.

E1/PRI card

Universal access

 

server

E1 cable

E1 networks terminating unit

Rx

Tx

9

Page 9
Image 9
Cisco Systems Cisco AS5300 manual Connect the E1/PRI Card for WAN Access

Cisco AS5300 specifications

The Cisco AS5300 is a versatile and robust access server designed for service providers and large enterprises, facilitating dial-up, broadband, and ISDN services. Launched as part of Cisco's extensive series of access solutions, the AS5300 stands out due to its high-density capabilities and ease of integration into existing network infrastructures.

One of the main features of the Cisco AS5300 is its ability to support a large number of simultaneous connections. With the capability to handle both voice and data traffic, the AS5300 can support up to 96 voice ports in a single unit, making it ideal for environments where both services are needed. This makes the AS5300 an efficient solution for providing remote access services to a significant number of users simultaneously, thus enhancing productivity and resource utilization.

The AS5300 employs advanced digital signal processing (DSP) technology, which ensures high-quality voice services, even in high-traffic situations. It is capable of supporting multiple voice and video codecs, offering flexibility in how services are delivered to end users. The device also features built-in Voice over IP (VoIP) capabilities, enabling seamless integration between traditional telephony and modern IP-based systems.

In terms of management and configuration, the Cisco AS5300 is equipped with user-friendly interfaces, allowing network administrators to easily configure and monitor the access server. With support for standard protocols such as SNMP, Telnet, and SSH, administrators can manage the server remotely, improving operational efficiency and reducing downtime.

The AS5300 is also designed with a focus on reliability and performance. Its redundant power supply options and hot-swappable components ensure that the system remains operational, even in the event of hardware failures. This is further complemented by Cisco’s strong commitment to security, providing various features that safeguard the network from potential threats.

In summary, the Cisco AS5300 is a highly capable access server that combines voice and data services in a single unit, demonstrating impressive scalability and reliability. Its advanced features, such as DSP technology, VoIP support, and robust management capabilities, make it a preferred choice for organizations looking to enhance their network infrastructure while delivering high-quality services to users. With its solid design and performance, the AS5300 continues to play a pivotal role in the evolution of enterprise and service provider networks.