Configure the Cisco AS5300

After installation, the Cisco Fast Step setup program starts automatically. Follow the onscreen instructions to guide you through configuring and testing the Cisco AS5300.

Cisco IOS Release Setup Script

Timesaver Section 3, “Gather Configuration Information,” is provided to help you gather the appropriate information before you begin to configure the Cisco AS5300 using the setup script.

This section shows how to start the Cisco IOS release setup script in the system configuration dialog to complete a basic configuration for the Cisco AS5300. For detailed steps for the setup script, refer to the Cisco AS5300 Universal Access Server Software Configuration Guide.

Note If you make a mistake, you can exit and run the system configuration dialog again. Press Ctrl-c, and type setup at the enable mode prompt (5300#).

Step 1 Power ON the Cisco AS5300. The power switch is on the rear panel of the Cisco AS5300, at the lower right corner, near the power cord. Messages will begin to appear in your terminal emulation program window.

Caution Do not press any keys on the keyboard until the messages stop. Any keys pressed during this time are interpreted as the first command typed when the messages stop, which might cause the Cisco AS5300 to power off and start over. It will take a few minutes for the messages to stop.

The messages look similar to the following:

Note The messages vary, depending on the Cisco IOS software release and feature set you selected. The screen displays in this section are for reference only and might not exactly reflect the messages on your screen.

System Bootstrap, Version 12.0(3)T, RELEASED SOFTWARE

Copyright (c) 1994-1999 by Cisco Systems, Inc.

AS5300 processor with 32768 Kbytes of main memory

rommon 3 > b flash:2:

program load complete, entry point:0x80008000, size:0x4e3b38 Self decompressing the image :

########################################################################################]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph

(c)of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph

(c)(1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Internetwork Operating System Software

Cisco Internetwork Operating System Software

IOS (tm) 5300 Software (C5300-IS-M), Version 12.2(2)XA, EARLY DEPLOYMENT RELEASE

SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Tue 26-Jun-01 23:47 by hwcheng

Image text-base: 0x600089C8, data-base: 0x61000000

IOS (tm) 5300 Software (C5300-IS-M), Released Version 12.0(19981001:221340)

Copyright (c) 1986-1999 by cisco Systems, Inc.

18

Page 18
Image 18
Cisco Systems manual Cisco IOS Release Setup Script, Configure the Cisco AS5300

Cisco AS5300 specifications

The Cisco AS5300 is a versatile and robust access server designed for service providers and large enterprises, facilitating dial-up, broadband, and ISDN services. Launched as part of Cisco's extensive series of access solutions, the AS5300 stands out due to its high-density capabilities and ease of integration into existing network infrastructures.

One of the main features of the Cisco AS5300 is its ability to support a large number of simultaneous connections. With the capability to handle both voice and data traffic, the AS5300 can support up to 96 voice ports in a single unit, making it ideal for environments where both services are needed. This makes the AS5300 an efficient solution for providing remote access services to a significant number of users simultaneously, thus enhancing productivity and resource utilization.

The AS5300 employs advanced digital signal processing (DSP) technology, which ensures high-quality voice services, even in high-traffic situations. It is capable of supporting multiple voice and video codecs, offering flexibility in how services are delivered to end users. The device also features built-in Voice over IP (VoIP) capabilities, enabling seamless integration between traditional telephony and modern IP-based systems.

In terms of management and configuration, the Cisco AS5300 is equipped with user-friendly interfaces, allowing network administrators to easily configure and monitor the access server. With support for standard protocols such as SNMP, Telnet, and SSH, administrators can manage the server remotely, improving operational efficiency and reducing downtime.

The AS5300 is also designed with a focus on reliability and performance. Its redundant power supply options and hot-swappable components ensure that the system remains operational, even in the event of hardware failures. This is further complemented by Cisco’s strong commitment to security, providing various features that safeguard the network from potential threats.

In summary, the Cisco AS5300 is a highly capable access server that combines voice and data services in a single unit, demonstrating impressive scalability and reliability. Its advanced features, such as DSP technology, VoIP support, and robust management capabilities, make it a preferred choice for organizations looking to enhance their network infrastructure while delivering high-quality services to users. With its solid design and performance, the AS5300 continues to play a pivotal role in the evolution of enterprise and service provider networks.