3.6.2 System Configuration
If you enable the IEEE 802.1X function, you can configure the parameters of this function.
1.Radius Server IP: Set the Radius Server IP address
2.Shared Key: Set an encryption key for use during authentication sessions with the specified radius server. This key must match the encryption key used on the Radius Server.
3.NAS, Identifier: Set the identifier for the radius client.
4.Server Port: Set the UDP destination port for authentication requests to the specified Radius Server.
5.Accounting Port: Set the UDP destination port for accounting requests to the specified Radius Server.
There are four types for each port:
Fu, Force unauthorized: The specified port is required to be held in the Unauthorized state.
Fa, Force authorized: The specified port is required to be held in the Authorized state.
Au, Auto: The specified port is set to the Authorized or Unauthorized state in accordance with the outcome of an authentication exchange between the Supplicant and the authentication server.
No, None: The specified port is required to be held in the Authorized state.
87
