4.1 Port Status
This page displays the status of each port.
Link Status: “Down” and “Up” means “No Link” and “Link” respectively.
InRate: Displays the input rate control (100K/unit) setting values.
OutRate: Displays the output rate control (100K/unit) setting values.
Enabled: Displays the port is enabled or disable depended on user settings. Enable will be displayed as “Yes”, disable will be displayed as “No”. If the port is unlink it will be treated as “No”. Auto: Displays the port is link on which Nway mode: Auto , Nway_Force , Force.
Spd/Dpx: Displays the port speed and duplex.
Flow Control: In auto / Nway force mode, displays the flow control status is enable or disable after negotiation.
In force mode, displays the flow control status is enable or disable depending on user settings.
90
