Create 802.1Q VLAN and add tagged /untagged member ports to it
1.Select <Edit>.
2.VLAN Name: Type a name for the new VLAN.
3.VLAN ID: Type a VID (between 2~4094). The default is 1. There are 256 VLAN groups to configure.
3.Protocol VLAN: Press Space key to choose protocol types.
4.Member: Press Space key to choose VLAN members. There are three types to select:
UnTagged: this port is the member port of this VLAN group and outgoing frames are NO
Tagged: this port is the member port of this VLAN group and outgoing frames are
NO: The port is NOT member of this VLAN group.
5.Press Ctrl+A go back action menu line.
6.Select <Save> to save all configure value.
NOTE: If the trunk group exists, you can see it (ex: TRK1, TRK2…) after port26, and you can configure it as the member of the VLAN or not.
58
