15
2. Port Status
Click the port status icon on the menu column you will see
the port status page. In this page, you can see the status of each
port that depended on user’s settings and the negotiation results.
1. State: Displays the status of each port (“on” means enable
and “off” means disable). “Unlink” will be treated as “off ”.
2. Link Status: “Down” and “Up” means “No Link” and “Link”
respectively.
3. Negotiation: Displays the auto negotiation modes: auto, force
and nway-force.
4. Speed status: Displays the speed of each port:
Port 1- 24 are 10/100Mbps
Port 25-26 are 10/100/1000Mbps(Gigabit Ethernet Switch)
10/100Mbps(Fast Ethernet Switch)
5. Duplex status: Displays the port is full-duplex mode or
half-duplex mode.
6. Flow Control:
Full: Displays the flow control status is enable or disable in
full duplex mode.
Half: Displays the backpressure is enable or disable in half
duplex mode.