Nortel Networks 1000BASE-SX manual Appendix E Default settings, Factory default settings continued

204Appendix E Default settings

Table 56 Factory default settings (continued)

Field	Default setting	Appears in this CI screen
Monitoring Mode	Disabled	“Port Mirroring Configuration screen”
		on page 139
Monitor/Unit Port	Zero-length string
Unit/Port X	Zero-length string
Unit	1	“Port Statistics screen” on page 141
Port	1
Console Port Speed	9600 Baud	“Console/Comm Port Configuration
		screen” on page 147
Console Switch Password	Not Required
Console Stack Password	Not Required
Console Read-Only Switch	user
Password
Console Read-Write Switch	secure
Password
Console Read-Only Stack	user
Password
Console Read-Write Stack	secure
Password

Note: The following two fields only appear when the switch is a participant in a stack configuration.

New Unit Number	Current stack order	“Renumber Stack Units screen” on
		page 154
Renumber units with new setting?	No
Unit	1	“Spanning Tree Port Configuration
		screen” on page 158
Participation	Normal Learning
Priority	128
Path Cost	10 or 100
Bridge Priority	8000 (read only)	“Spanning Tree Switch Settings
		screen” on page 161
Designated Root	8000 (bridge_id) (read only)
Root Port	0 (read only)
Root Path Cost	0 (read only)
Hello Time	2 seconds (read only)
Maximum Age Time	20 seconds (read only)

209418-A