Xerox D63-069-00 manual JES Output Configuration Parameters

JES Output Configuration Parameters

CLASS=

Description	JES output class used for output directed to JES spool. The output
	class used (default A) must be defined in JES.
Range/Options	A JES defined output class
Notes	Only valid JES parameter values should be used. Invalid parameters
	will result in DYNALLOC OPEN errors when attempting to print.

DEST=

Description	JES output destination name for output directed to JES. If this value
	is omitted, the PRTID value will be used for DEST(i.e. default).
Range/Options	1-8 character JES DEST name
Notes	The default value of PRTID will be used if this parameter is omitted.
	This keyword is only used for JES output. Keyword overrides the
	OUTPUT statement. Only valid JES parameter values should be
	used. Invalid parameters will result in DYNALLOC OPEN errors when
	attempting to print.

FCB=

Description	FCB statement for output directed to JES (optional). Permits defi-
	nition of FCB options for JES output.
Range/Options	1-4 character FCB name
Notes	No default value applies. Only valid JES parameter values should be
	used. Invalid parameters will result in DYNALLOC OPEN errors when
	attempting to print.

FORMS=

Description	JES output forms name for output directed to JES. This parameter is
	used for the JES Work Selection criteria.
Range/Options	1-4 character JES FORMS name
Notes	No default value applies. Only valid JES parameter values should be
	used. Invalid parameters will result in DYNALLOC OPEN errors when
	attempting to print.

NODE=

Description	JES node to be used for output routed via JES. No default value ap-
	plies. Where only one JES system is in use, this definition can be
	omitted.
Range/Options	1-8 character JES NODE name
Notes	This keyword can be used to direct output to another JES complex,
	or a remote system defined to the local JES complex. This keyword
	is only used for JES output. Only valid JES parameter values should
	be used. Invalid parameters will result in DYNALLOC OPEN errors
	when attempting to print.

ida XFC Spool File Converter Installation Procedure 27