Xerox D63-069-00 XES010I SMF Record Type is TOO Large, XES012I no KEY Supplied in IDA XFC Profile

•XES008I INVALID SUB PARAMETER value

•XES018I INVALID SUB PARAMETER value

•XES031I INVALID SUB PARAMETER value

Description	The value of a idaXFC profile sub parameter keyword is invalid
Severity	The idaXFC terminates.
Action	Correct the incorrect idaXFC profile sub parameter keyword keyword
	and restart the idaXFC.

•XES009I INVALID DECIMAL NUMBER argument

•XES019I INVALID DECIMAL NUMBER argument

Description	The idaXFC subparameter does not contain a valid decimal value.
Severity	The idaXFC continues using the default for the named value.
Action	Correct the idaXFC subparameter to include a valid decimal value.

•XES010I SMF RECORD TYPE IS TOO LARGE

Description	The idaXFC profile SMF keyword value exceeds the allowable range.
Severity	SMF recording will not be performed.
Action	Correct the SMF keyword to reflect a valid value.

•XES011I IDA XFC PRODUCT IS NOT LICENSED FOR THIS CPUID nnnn

Description	The idaXFC program is not licensed for this CPU complex, or the
	specified key is invalid.
Severity	The idaXFC terminates.
Action	Obtain the required product key using the procedures described in
	the installation manual. The CPUID number supplied on this mes-
	sage should be recorded.

•XES012I NO KEY SUPPLIED IN IDA XFC PROFILE

Description	A KEY statement is missing in the idaXFC PROFILE specified key is
	invalid.
Severity	The idaXFC terminates.
Action	Code the idaXFC PROFILE KEY statement using the product KEY
	supplied.

•XES013I MORE THAN ONE PRINTER DEFINED IN TEST MODE

Description	An idaXFC KEY PROFILE statement was not detected, and more
	than one PRINTER statement is detected.
Severity	The idaXFC terminates.
Action	Operation of one printer is possible without the product key (i.e. TEST
	MODE) If additional printers are required to be tested, obtain a prod-
	uct key from the product distributor.

Appendix A. idaXFC Messages and Codes A-3