Xerox D63-069-00 manual XES014I IDA XFC Running in Test Mode, XES015I no Printers Defined

•XES014I IDA XFC RUNNING IN TEST MODE

Description	The product is running in TEST MODE, where only one printer can
	be defined.
Severity	Information only message.
Action	Operation of one ICDS printer is possible without the idaXFC KEY
	PROFILE statement (i.e. TEST MODE). If additional printers are re-
	quired to be tested, obtain a product key from the product distributor.

•XES015I NO PRINTERS DEFINED

Description	An operator operation has been attempted when no printers are de-
	fined in the idaXFC profile.
Severity	No action will be performed (printing is not possible).
Action	Respecify the idaXFC profile to reference one or more printers.

•XES016I IDA XFC LICENSED FOR nnnn PRINTERS

Description	Operation of the product has terminated as the number of licensed
	printers has been exceeded.
Severity	Processing for the named subsystem is terminate.
Action	A maximum of stated number of printers may be defined for print op-
	eration to all instances of IDAXFC operational on the same system
	image. Support of additional printers will require use of another prod-
	uct key.

•XES017I nnnn PRINTERS DEFINED

Description	The idaXFC has located nnnn PRINTER definitions in the idaXFC
	PROFILE.
Severity	Information only message.
Action	None.

•XES019I INVALID DECIMAL NUMBER nnnnn

Description	A non-decimal numeric value has been specified in the IDAXFC pro-
	file.
Severity	The value specified will not be used for the named printer.
Action	Correct the IDAXFC profile entry for the target printer.

•XES020I OUT OF RANGE nnnnn

Description	An IDAXFC profile value contains a value that is outside of the ac-
	ceptable range.
Severity	The value specified will not be used for the named printer.
Action	Correct the IDAXFC profile entry for the target printer.

A-4 ida XFC Installation Guide