Xerox D63-069-00 General Installation Procedure, Load the datasets supplied on the product tape

General Installation Procedure

The product tape contains a number of tape files that can be loaded using the IEBGENER utility.

Load the datasets supplied on the product tape

The first file on the tape contains an IEBGENER JCL that can be used to load the required files and create the installation libraries. A sample JCL is indicated here to assist in obtain- ing the IEBGENER load JCL:

//S1 EXEC PGM=IEBGENER

//SYSUT1 DD DISP=OLD,DSN=IDATA.SL1,LABEL=(1,SL),UNIT=TAPE,

//VOL=(PRIVATE,RETAIN,SER=IDATA)

//*

//SYSUT2 DD DISP=(NEW,CATLG,DELETE),DSN=IDAXFC.JCLLIB(LOADXES),

//SPACE=(TRK,(20,20,28)),UNIT=DISK,VOL=SER=XXXXXX

//*

//SYSIN DD DUMMY //SYSPRINT DD SYSOUT=* /*

Figure 1. Sample JCL to load the LOADXES JCL from the Product Tape

The LOADXES JCL contained in tape file one should be customized according to your in- stallation standards, and can subsequently be executed to read all necessary files from the product tape.

Upon execution of the LOADXES JCL, the following data sets are created:

Data set name	Data set type	Organization	Description
JCL	JCL Library	User specified	Program JCL Library
MEMO	1403 output	PS, VBM, LRECL 132,	Installation memo and
		BLKSIZE 4096	documentation
XES.MACLIB	Macro Library	PO, FB, LRECL 80,	Macro control statements
		BLKSIZE 3120
ASM	Assembler Source Library	PO, FB, LRECL 80,	Assembler Source Code
		BLKSIZE 3120
OBJ	Program Object Library	PO, FB, LRECL 80,	Object Code Library for
		BLKSIZE 3120	program modules
FONT300	Font Library	PO, VBM, LRECL 8205,	Font Library for supplied
			300 pel fonts and
		BLKSIZE 15000
			codepages.
Table 1. List of Data sets Created by the Installation Procedure

General Installation Procedure 17