Xerox D63-069-00 manual IdaXFC batch Installation Verification Procedure

Generate the idaXFC program load module

The following JCL indicates the JCL used to generate the program load module. Modify the supplied LNKXESR linkage editor JCL to match your installation standards.

//LNKXESR JOB (ACCT#),'HF',CLASS=A,MSGCLASS=X,MSGLEVEL=(1,1),

//TIME=1440

//*

//* SAMPLE JCL TO LKED XESREAD BATCH CONVERTER //*

//LNKXESR EXEC PGM=IEWL,

//PARM='LIST,LET,XREF,MAP,RENT'

//SYSLMOD DD DISP=SHR,DSN=YYYYY.XES.LOADLIB //OBJLIB DD DISP=SHR,DSN=YYYYY.XES.OBJ

//SYSUT1 DD SPACE=(1024,(120,120),,,ROUND),UNIT=VIO //SYSPRINT DD SYSOUT=*

//SYSLIN DD *

INCLUDE OBJLIB(XESREAD) INCLUDE OBJLIB(XESEXIT) INCLUDE OBJLIB(CHANEXIT) INCLUDE OBJLIB(XESTRANS) NAME XESREAD(R)

/*

Figure 7. JCL Sample for IDAXFC Linkage

idaXFC batch Installation Verification Procedure

Verification of the correct function of the idaXFC batch can be performed using the verifi- cation data sets supplied on the distribution tape.

//XESREAD JOB (ACCT#),' ',CLASS=A,MSGCLASS=X,MSGLEVEL=(1,1),

//TIME=1440

//*

//* SAMPLE JCL TO RUN XESREAD BATCH CONVERSION //*

//XESREAD EXEC PGM=XESREAD,REGION=3500K

//STEPLIB DD DISP=SHR,DSN=YYYYY.XES.LOADLIB //*

//OUTA	OUTPUT DEST=PRT111,PRMODE=PAGE
//*
//SYSUT1	DD DISP=SHR,DSN=XES.DATASET(XES)
//SYSUT2	DD SYSOUT=A,OUTPUT=(*.OUTA),

//DCB=(RECFM=VBM,LRECL=8205,BLKSIZE=32000)

//*

//SYSPRINT DD SYSOUT=* //*

//FONT300 DD DISP=SHR,DSN=YYYYY.XES.FONT300 FONTS

//DD DISP=SHR,DSN=SYS1.FONT300

//XESLIB	DD DISP=SHR,DSN=YYYYY.XES.XESLIB FORMS
//*

Figure 8. JCL Sample Invocation of the XESREAD Program

idaXFC batch Software Installation and Modification 33