idaXFC Spool File Converter Operator Commands

The idaXFC utilizes an operator interface. This interface permits the modification of config- uration values without requiring that idaXFC is shutdown and restarted. Operator com- mands can be entered at the Master console or using a program that supports this interface (e.g. SDSF). The commands supported by the operator interface are indicated in the following figures:

P procname jobname

F procname jobname,ADD,prt,

F procname jobname,ADD,prt

F procname jobname,Disp, [ option...]

Options:

Default

PRinter

Level

STOP

START

FORCE

DUMP

Figure 9. Syntax of the Operator Interface - Operator Commands

F procname jobname,default, prt, [ option...]

Options:

TRACE= OFF ALL IO HEX OUTPUT WTO ALL

CLASS=output class

DEST=destination

FCB=fcb name

FORMS=forms name

LOGDD=ddname

NODE=JES output node OUTPUT=JES output ddname

PAPER=A4 A3 LETTER LEGAL MONARCH C5 COM10 EXECUTIVE PRMODE=Printer selection mode

START= YES NO

Figure 10. Syntax of the Operator Interface - Printer configuration

The operator interface provides four basic types of operation:

Start/Stop/Force

Performs normal printer startup, and normal system termination.

Display

Provides a display of printer and default configuration display information.

Add

Dynamic addition of new printer devices

Modify printer/default

Modify printer and default settings

34 ida XFC Installation Guide

Page 31
Image 31
Xerox D63-069-00 manual IdaXFC Spool File Converter Operator Commands, Stop Start Force Dump