Xerox D63-069-00 manual IdaPSS XES Exit Installation Checklist

The installation process will require that the following items can be created / imple- mented prior to the operation of idaXFC;

1.APF authorized load library

An APF authorized load library is required to execute the IDAXFC program.

2.PROC library

A system-accessible procedure library should be available to be used for the startup procedure.

3.MVS PPT modifications.

Modifications to the Program Properties Table will be required to permit operation of the IDAXFC.

4.System security rules (e.g. RACF/ACF) for the IDAXFC.

Rule definitions will be required for the IDAXFC PROC to permit read access to AFP resources. Write access for the control information dataset will also be re- quired based on a high-level qualifier.

5.Spool System FSS and Printer Definitions

Customization of either JES2, JES3 or CA-Spool will be required

*JES PARM deck modification

Definitions of the FSS and appropriate printer definitions will be required in the JES PARM deck. Both FSS and printer definitions can be dynamically added during normal JES processing, however for permanent FSS and printer definitions, a JES warm start will be required.

*CA-Spool modifications

Modifications to the startup procedure and customization of initialization values will be required. A CA-Spool warm start will be required to implement these changes.

•Installation checklist

The following sequence can be used;

1.Load Files from product tape using IEBGENER

2.Allocate / select an APF authorized load library for the IDAXFC module

3.Generate the IDAXFC load module using the BLDXFC JCL.

4.Create IDAXFC PROC member

5.Install the supplied codepages and fonts

6.Create/update installation security access for IDAXFC module

7.Perform JES2/JES3 or CA-Spool customization

8.Perform PPT table modifications

9.Activate system modifications (IPL) - JES warm start

10.Perform installation verification procedure

idaPSS XES Exit Installation Checklist

This checklist describes the sequence of activities required to perform installation of the idaXFC XES exits when idaPSS has already been installed on the system.

1.Installation of ida PSS Version 7.05 or higher

System Requirements 15