Chapter 3 Using the console interface 139
Table 28 describes the MultiLink Trunk Utilization screen fields.
Table 28 MultiLink Trunk Utilization screen fields
Field | Description |
|
|
| |
Trunk | Column header for the | |
| this column indicates the trunk (1 to 6) that corresponds to the switch ports specified | |
| in the Port field. |
|
|
| |
Traffic Type | Allows you to choose the traffic type to be monitored for percent of bandwidth | |
| utilization (see Range). | |
| Default Value | Rx and Tx |
| Range | Rx and Tx, Rx, Tx |
|
| |
Unit/Port | Lists the trunk member ports that correspond to the trunk specified in the Trunk | |
| column. The (Unit/) extension to the Port column name only appears when the switch | |
| (unit) is part of a stack configuration. It indicates that the ports in this row are | |
| associated with the specified unit number configured in the Unit field. | |
|
| |
Last 5 Minutes | This | |
| Traffic Type field) utilized by the port in the last 5 minutes. This field provides a | |
| running average of network activity and is updated every 15 seconds. | |
|
| |
Last 30 Minutes | This | |
| Traffic Type field) utilized by the port in the last 30 minutes. This field provides a | |
| running average of network activity and is updated every 15 seconds. | |
|
| |
Last Hour | This | |
| Traffic Type field) utilized by the port in the last 60 minutes. This field provides a | |
| running average of network activity and is updated every 15 seconds. | |
|
|
|
Port Mirroring Configuration screen
The Port Mirroring Configuration screen allows you to configure a specific switch port to monitor one specific port. You can specify
For more information about the port mirroring feature, see “Port mirroring (conversation steering)” on page 39.
