usb 5-2: device descriptor not accepting address 2, error -71

These errors are cosmetic in nature and should be ignored. These messages are caused due to reset of the USB devices during the firmware update process and are harmless.

Configuring a Supported Web Browser

The following sections provide instructions for configuring the supported Web browsers.

Configuring Your Web Browser to Connect to the iDRAC6 Web-Based Interface

If you are connecting to the iDRAC6 Web-based interface from a management station that connects to the Internet through a proxy server, you must configure the Web browser to access the Internet from this server.

To configure your Internet Explorer Web browser to access a proxy server:

1Open a Web browser window.

2Click Tools, and click Internet Options.

3From the Internet Options window, click the Connections tab.

4Under Local Area Network (LAN) settings, click LAN Settings.

5If the Use a proxy server box is selected, select the Bypass proxy server for local addresses box.

6Click OK twice.

List of Trusted Domains

When you access the iDRAC6 Web-based interface through the Web browser, you are prompted to add the iDRAC6 IP address to the list of trusted domains if the IP address is missing from the list. When completed, click Refresh or relaunch the Web browser to reestablish a connection to the iDRAC6 Web-based interface.

Basic Installation of the iDRAC6

41

Page 41
Image 41
Dell IDRAC6 manual Configuring a Supported Web Browser, List of Trusted Domains, Click Tools, and click Internet Options