Dell IDRAC6 manual 362, Network Security Page Settings Description, Penalty Time

Table 22-16. Network Security Page Settings

Settings	Description
IP Range Enabled	Enables the IP Range checking feature, which defines a specific
	range of IP addresses that can access the iDRAC6.
IP Range Address	Determines the acceptable IP address bit pattern, depending on
	the 1's in the subnet mask. This value is bitwise AND’d with the
	IP Range Subnet Mask to determine the upper portion of the
	allowed IP address. Any IP address that contains this bit pattern
	in its upper bits is allowed to establish an iDRAC6 session.
	Logins from IP addresses that are outside this range will fail.
	The default values in each property allow an address range from
	192.168.1.0 to 192.168.1.255 to establish an iDRAC6 session.
IP Range Subnet	Defines the significant bit positions in the IP address.
Mask	The subnet mask should be in the form of a netmask, where the
	more significant bits are all 1's with a single transition to all
	zeros in the lower-order bits.
	For example: 255.255.255.0
IP Blocking	Enables the IP address blocking feature, which limits the
Enabled	number of failed login attempts from a specific IP address for a
	preselected time span.
IP Blocking Fail	Sets the number of login failures attempted from an IP address
Count	before the login attempts are rejected from that address.
IP Blocking Fail	Determines the time span in seconds within which IP Block Fail
Window	Count failures must occur to trigger the IP Block Penalty Time.
IP Blocking	The time span in seconds within which login attempts from an
Penalty Time	IP address with excessive failures are rejected.
Table 22-17. Network Security Page Buttons
Button	Description
Print	Prints the Network Security page
Refresh	Reloads the Network Security page
Apply Changes	Saves the changes made to the Network Security page.

Go Back to Network Returns to the Network page.

Configuration Page

362

Configuring Security Features