System Event Log Menu

The System Event Log Menu allows you to view System Event Log (SEL) messages and to clear the log messages. Press <Enter> to display the System Event Log Menu. The system counts the log entries and then displays the total number of records and the most recent message. The SEL retains a maximum of 512 messages.

To view SEL messages, select View System Event Log and press <Enter>. Use <Left Arrow> to move to the previous (older) message and

<Right Arrow> to move to the next (newer) message. Enter a record number to jump to that record. Press <Esc> when you are through viewing SEL messages.

To clear the SEL, select Clear the System Event Log and press <Enter>.

When you have finished with the SEL menu, press <Esc> to return to the previous menu.

Exiting the iDRAC6 Configuration Utility

When you have finished making changes to the iDRAC6 configuration, press the <Esc> key to display the Exit menu.

Select Save Changes and Exit and press <Enter> to retain your changes. If this operation fails, one of the following message is displayed:

iDRAC6 Communication Failure — Displayed if iDRAC is not accessible.

Some of the settings cannot be applied — Displayed when few settings cannot be applied.

Select Discard Changes and Exit and press <Enter> to ignore any changes you made.

Select Return to Setup and press <Enter> to return to the iDRAC6 Configuration Utility.

314

Using the iDRAC6 Configuration Utility

Page 314
Image 314
Dell IDRAC6 manual System Event Log Menu, Exiting the iDRAC6 Configuration Utility, 314