Dell IDRAC6 manual LAN User Configuration, Reset to Default, 311, Only

LCD Error Display	Select Simple or SEL (System Event Log).
	This feature allows error messages to be displayed on the LCD
	in one of two formats:
	The Simple format provides an English language description
	of the event.
	The SEL format displays a System Event Log text string
LCD Remote Virtual	Select Enabled to display the text Virtual Console whenever a
Console Indication	Virtual Console is active on the unit.
LCD Front Panel	Press <Right Arrow>, <Left Arrow >, and spacebar to switch
Access	between the options: Disabled, View And Modify, and View
	Only.
	This setting defines the user access level for the LCD.

LAN User Configuration

The LAN user is the iDRAC6 administrator account, which is root by default. Press <Enter> to display the LAN User Configuration submenu. When you have finished configuring the LAN user, press <Esc> to return to the previous menu.

Reset to Default

Use the Reset to Default menu item to reset all of the iDRAC6 configuration items to the factory defaults. This may be required, for example, if you have forgotten the administrative user password or if you want to reconfigure the iDRAC6 from the default settings.

Press <Enter> to select the item. The following warning message is displayed:

Resetting to factory defaults will restore remote Non- Volatile user settings. Continue?

< NO (Cancel) >

< YES (Continue) >

Select YES and press <Enter> to reset the iDRAC6 to the defaults. Any of the following error messages is displayed if this operation fails:

•Reset command was not successful. Please try later- iDRAC is busy.

Using the iDRAC6 Configuration Utility

311