Using the iDRAC6 Directory Service 159
Installing Dell Extension to Microsoft Active Directory Users and Computers Snap-In
When you extend the schema in Active Directory, you must also extend the
Active Directory Users and Computers Snap-in so the administrator can
manage iDRAC devices, Users and User Groups, iDRAC Associations, and
iDRAC Privileges.
When you install your systems management software using the Dell Systems
Management Tools and Documentation DVD, you can install the Snap-in by
selecting the Active Directory Users and Computers Snap-in option during
the installation procedure. See the Dell OpenManage Software Quick
Installation Guide for additional instructions about installing systems
management software. For x64-bit Windows Operating Systems, the Snap-in
installeris l ocated under <DVDdrive>:\SYS MGMT\ManagementStation\
support\OMActiveDirectory_SnapIn64
For more information about the Active Directory Users and Computers
Snap-in, see your Microsoft documentation.
Installing the Administrator Pack
You must install the Administrator Pack on each system that is managing the
Active Directory iDRAC Objects. If you do not install the Administrator Pack,
you cannot view the Dell iDRAC Object in the container.
See "Opening the Microsoft Active Directory Users and Computers Snap-In"
on page 159 for moreinfo rmation.
Opening the Microsoft Active Directory Users and Computers Snap-In
To open the Active Directory Users and Computers Snap-in:
1
If you are logged into the domain controller, click
Start
Admin Tools
Active Directory Users and Computers
.
If you are not logged into the domain controller, you must have the
appropriate Microsoft Administrator Pack installed on your local system.
To install this Administrator Pack, click
Start
Run
, type
MMC
,
and press
Enter
.
The MMC is displayed.
2
In the
Console 1
window, click
File
(or
Console
on systems running
Windows 2000).