https://<IP address>:<port number>

where IP address is the IP address for the iDRAC6 and port number is the HTTPS port number.

The iDRAC6 Login page is displayed prompting you to insert the Smart Card.

2Insert the Smart Card into the reader and click Login. The iDRAC6 prompts you for the Smart Card’s PIN.

3Enter the Smart Card PIN for local Smart Card users and if the user is not created locally, iDRAC6 will prompt to enter the password for the user’s Active Directory account.

. NOTE: If you are an Active Directory user for whom the Enable CRL check for Smart Card Logon is selected, iDRAC6 attempts to download the CRL and checks the CRL for the user's certificate. The login through Active Directory fails if the certificate is listed as revoked in the CRL or if the CRL cannot be downloaded for any reason.

You are logged into the iDRAC6.

Logging Into the iDRAC6 Using Active Directory Smart Card Authentication

1Log into the iDRAC6 using https. https://<IP address>

If the default HTTPS port number (port 443) has been changed, type: https://<IP address>:<port number>

where IP address is the IP address for the iDRAC6 and port number is the HTTPS port number.

The iDRAC6 Login page is displayed prompting you to insert the Smart Card.

2Insert the Smart Card and click Login. The PIN pop-up dialog box is displayed.

3Enter the PIN and click OK.

Configuring iDRAC6 for Single Sign-On or Smart Card Login

197

Page 197
Image 197
Dell IDRAC6 manual 197