Dell IDRAC6 Creating an iDRAC Device Object, Select iDRAC Device Object, Select Privilege Object

3Click Add/Remove Snap-in.

4Select the Active Directory Users and Computers Snap-in and click Add.

5Click Close and click OK.

Adding iDRAC Users and Privileges to Microsoft Active Directory

Using the Dell-extended Active Directory Users and Computers Snap-in, you can add iDRAC users and privileges by creating iDRAC, Association, and Privilege objects. To add each object type, perform the following procedures:

•Create an iDRAC device Object

•Create a Privilege Object

•Create an Association Object

•Configuring an Association Object

Creating an iDRAC Device Object

1In the MMC Console Root window, right-click a container.

2Select New→ Dell Remote Management Object Advanced. The New Object window is displayed.

3Type a name for the new object. The name must be identical to the iDRAC Name that you will type in Step A of "Configuring Microsoft Active Directory With Extended Schema Using the iDRAC6 Web-Based Interface" on page 162.

4Select iDRAC Device Object.

5Click OK.

Creating a Privilege Object

NOTE: A Privilege Object must be created in the same domain as the related Association Object.

1In the Console Root (MMC) window, right-click a container.

2Select New→ Dell Remote Management Object Advanced. The New Object window is displayed.

3Type a name for the new object.

4Select Privilege Object.

160

Using the iDRAC6 Directory Service