Table 4-32. SD Card States

SD Card

State

Description

 

 

 

SD1 and SD2

Boot

The controller is powering up.

 

 

 

 

Active

The card receives all SD writes and is used for SD reads.

 

 

 

 

Standby

The card is the secondary card. It is receiving a copy of

 

 

the all the SD reads.

 

 

 

 

Failed

An error is reported during a SD card read or write.

 

 

 

 

Absent

The SD card is not detected.

 

 

 

 

Offline

At boot, the Card Indentification (CID) signature of the

 

 

card is different from the Non-volatile (NV) storage

 

 

value or the card is the destination of a copy operation

 

 

that is in-progress.

 

 

 

 

Write

The card is write-protected by the physical latch on the

 

Protected

SD card. IDSDM cannot use a write-protected card.

 

 

 

vFlash

Active

The card receives all SD writes and is used for SD reads.

 

 

 

 

Absent

The SD card is not detected.

 

 

 

86

Configuring the iDRAC6 Using the Web Interface

Page 86
Image 86
Dell IDRAC6 manual SD Card States Description