Table 4-8. Network Configuration Page Buttons

Button

Description

 

 

Print

Prints the Network values that appear on the screen.

 

 

Refresh

Reloads the Network page.

Advanced Settings Opens the Network Security page, allowing the user to enter

 

IP Range and IP Blocking attributes.

 

 

Apply

Saves any new settings made to the Network page.

 

NOTE: Changes to the NIC IP address settings will close all user

 

sessions and require users to reconnect to the iDRAC6 Web

 

interface using the updated IP address settings. All other

 

changes will require the NIC to be reset, which may cause a

 

brief loss in connectivity.

 

 

Configuring IP Filtering and IP Blocking

NOTE: You must have Configure iDRAC permission to perform the following steps.

1Click Remote AccessNetwork/Security and then click the Network tab to open the Network page.

2Click Advanced Settings to configure the network security settings.

Table 4-9 describes the Network Security Page Settings. When you have finished configuring the settings, click Apply.

3Click the appropriate button to continue. See Table 4-10.

Configuring the iDRAC6 Using the Web Interface

55

Page 55
Image 55
Dell IDRAC6 manual Configuring IP Filtering and IP Blocking, Network Configuration Page Buttons Description, Apply