Dell IDRAC6 manual 313

Table 17-3. LAN User Configuration

Item	Description
Auto–Discovery	Before adding your Dell system to the network and using the
(continued...)	auto–discovery feature, ensure that:
	• Dynamic Host Configuration Protocol (DHCP)
	server/Domain Name System (DNS) are configured.
	• Provisioning Web services is installed, configured, and
	registered.
Provisioning Server	This field is used to configure the provisioning server. The
	provisioning server address can be a combination of IPv4
	addresses or hostname and should not exceed 255 characters.
	Each address should be separated by a comma.
	If the auto-discovery feature is enabled, and after the
	auto-discovery process completes successfully, user credentials
	are retrieved from the configured provisioning server to allow
	future remote provisioning.
	For more information, see the Dell Lifecycle Controller User
	Guide available on the Dell Support website at
	support.dell.com/manuals.
Account Access	Select Enabled to enable the administrator account. Select
	Disabled to disable the administrator account or when
	Auto-Discovery is enabled.
Account Privilege	Select between Admin, User, Operator, and No Access.
Account User Name	Press <Enter> to edit the user name and press <Esc> when
	you have finished. The default user name is root.
Enter Password	Type the new password for the administrator account. The
	characters are not echoed on the display as you type them.
Confirm Password	Retype the new password for the administrator account. If the
	characters you enter do not match the characters you entered
	in the Enter Password field, a message is displayed and you
	must re-enter the password.

•Failed to restore settings to default values - Timeout.

•Not able to send Reset command. Please try later- iDRAC is busy.

Using the iDRAC6 Configuration Utility

313