Dell IDRAC6 195, Smart Card Settings Description, Enabled with Remote Racadm Enables Smart Card

Table 8-1. Smart Card Settings

Setting	Description
Configure Smart Card	• Disabled — Disables Smart Card logon. Subsequent logins
Logon	from the graphical user interface (GUI) display the regular
	login page. All command line out-of-band interfaces
	including secure shell (SSH), Telnet, Serial, and remote
	RACADM are set to their default state.
	• Enabled — Enables Smart Card logon. After applying the
	changes, logout, insert your Smart Card and then click
	Login to enter your Smart Card PIN. Enabling Smart Card
	logon disables all CLI out-of-band interfaces including SSH,
	Telnet, Serial, remote RACADM, and IPMI over LAN
	because these services support only single-factor
	authentication.
	• Enabled with Remote Racadm — Enables Smart Card
	logon along with remote RACADM. All other CLI out-of-
	band interfaces are disabled.
	If you select Enabled or Enabled with Remote Racadm, you
	are prompted for a Smart Card logon during any subsequent
	logon attempts using the Web-based interface.
	It is recommended that the iDRAC6 administrator use the
	Enable with Remote Racadm setting only to access the
	iDRAC6 Web-based interface to run scripts using the
	remote RACADM commands. If the administrator does not
	need to use the remote RACADM, it is recommended to use
	the Enabled setting for Smart Card logon. Ensure that the
	iDRAC6 local user configuration and/or Active Directory
	configuration is complete before enabling Smart Card
	Logon.
	NOTE: The Smart Card logon requires you to configure the
	local iDRAC6 users with the appropriate certificates. If the
	Smart Card logon is used to log in a Microsoft Active Directory
	user, then you must ensure that you configure the Active
	Directory user certificate for that user. You can configure the
	user certificate in the Users→ User Main Menu page.

Configuring iDRAC6 for Single Sign-On or Smart Card Login

195