Dell IDRAC6 manual 120

error is found in the .cfg file. The user must correct all errors before any configuration can take place. The -coption may be used in the config subcommand, which verifies syntax only and does not perform a write operation to the iDRAC6.

Use the following guidelines when you create a .cfg file:

•If the parser encounters an indexed group, the index of the group is used as the anchor. Any modifications to the objects within the indexed group is also associated with the index value.

For example:

[cfgUserAdmin]

#cfgUserAdminIndex=11

cfgUserAdminUserName=

#cfgUserAdminPassword=******** (Write-Only) cfgUserAdminEnable=0 cfgUserAdminPrivilege=0x00000000 cfgUserAdminIpmiLanPrivilege=15 cfgUserAdminIpmiSerialPrivilege=15 cfgUserAdminSolEnable=0

•The indexes are read-only and cannot be modified. Objects of the indexed group are bound to the index under which they are listed and any valid configuration to the object value is applicable only to that particular index.

•A predefined set of indexes are available for each indexed group. For more information, see the iDRAC6 Administrator Reference Guide available on the Dell Support website at support.dell.com/manuals.

•Use the racresetcfg subcommand to reset the iDRAC6 to original defaults, and then run the racadm config -f<filename>.cfg command. Ensure that the .cfg file includes all required objects, users, indexes, and other parameters.

CAUTION: Use the racresetcfg subcommand to reset the database and the iDRAC6 NIC settings to the original default settings and remove all users and user configurations. While the root user is available, other users’ settings are also reset to the default settings.

120

Advanced iDRAC6 Configuration