For more information about vflashsd, see the iDRAC6 Administrator Reference Guide available on the Dell Support website at support.dell.com/manuals.

NOTE: The racadm vmkey reset command is deprecated from 1.5 release onwards. The functionality of this command is now covered by vflashsd initialize. While execution of the vmkey reset command will be successful, it is recommended to use the vflashsd initialize command. For more information, see "Initializing the vFlash or Standard SD Card" on page 273.

Managing vFlash Partitions Using iDRAC6 Web Interface

You can perform the following:

Create an empty partition

Create a partition using an image file

Format a partition

View available partitions

Modify a partition

Attach/Detach a partition

Delete existing partitions

Download the contents of a partition

Boot to a partition

Creating an Empty Partition

An empty partition is similar to an empty USB key. You can create empty partitions on a vFlash or standard SD card. You can choose to create partition of type Floppy or Hard Disk. The partition type CD is not supported for creating empty partitions.

NOTE: You must have Access Virtual Media privilege to create empty partitions.

274

Configuring vFlash SD Card and Managing vFlash Partitions

Page 274
Image 274
Dell IDRAC6 manual Managing vFlash Partitions Using iDRAC6 Web Interface, Creating an Empty Partition, 274