Viewing the Last System Crash Screen

NOTE: The last crash screen feature requires the managed system with the Auto Recovery feature configured in Server Administrator. In addition, ensure that the Automated System Recovery feature is enabled using the iDRAC6. Navigate to the Services page under the Network/Security tab in the Remote Access section to enable this feature.

The Last Crash Screen page displays the most recent crash screen. The last system crash information is saved in iDRAC6 memory and is remotely accessible.

To view the Last Crash Screen page:

1In the System tree, click System.

2Click the Logs tab and then click Last Crash Screen.

The Last Crash Screen page provides the following buttons (see Table 19-9) in the top-right corner of the screen:

Table 19-9. Last Crash Screen Page Buttons

Button

Action

 

 

Print

Prints the Last Crash Screen page.

 

 

Refresh

Reloads the Last Crash Screen page.

 

 

NOTE: Due to fluctuations in the Auto Recovery timer, the Last Crash Screen may not be captured when the System Reset Timer is set to a value less than 30 seconds. Use Server Administrator or IT Assistant to set the System Reset Timer to at least 30 seconds and ensure that the Last Crash Screen functions properly.

See "Configuring the Managed System to Capture the Last Crash Screen" on page 315 for additional information.

Recovering and Troubleshooting the Managed System

333

Page 333
Image 333
Dell IDRAC6 manual Viewing the Last System Crash Screen, To view the Last Crash Screen, 333