Click the Products tab to add one iDRAC device connected to the network that is available for the defined users or user groups. Multiple iDRAC devices can be added to an Association Object.

Adding iDRAC Devices

To add iDRAC devices:

1Select the Products tab and click Add.

2Type the iDRAC device name and click OK.

3In the Properties window, click Apply and click OK.

Configuring Microsoft Active Directory With Extended Schema Using the iDRAC6 Web-Based Interface

1Open a supported Web browser window.

2Log in to the iDRAC6 Web-based interface.

3Go to Remote AccessNetwork/Security tab→ Directory Service tab→ Microsoft Active Directory.

4Scroll to the bottom of the Active Directory Configuration and Management page, and click Configure Active Directory.

The Active Directory Configuration and Management Step 1 of 4 page is displayed.

5Under Certificate Settings, select Enable Certificate Validation if you want to validate the SSL certificate of your Active Directory servers; otherwise, go to step 9.

6Under Upload Active Directory CA Certificate, type the file path of the certificate or browse to find the certificate file.

NOTE: You must type the absolute file path, which includes the full path and the complete file name and file extension.

7Click Upload.

The certificate information for the Active Directory CA certificate that you uploaded is displayed.

8Under Upload Kerberos Keytab, type the path of the keytab file or browse to locate the file. Click Upload. The Kerberos keytab is uploaded into iDRAC6.

162

Using the iDRAC6 Directory Service

Page 162
Image 162
Dell IDRAC6 manual Adding iDRAC Devices, 162