Dell IDRAC6 manual Configuring and Managing Generic Ldap, Configuring iDRAC6 Services, Print

Table 4-19. Active Directory Configuration and Management Page Buttons

Button	Definition
Print	Prints the values that are displayed on the Active Directory
	Configuration and Management page.
Refresh	Reloads the Active Directory Configuration and Management
	page.

Configure Active Enables you to configure Active Directory. See "Using the

Directory iDRAC6 Directory Service" on page 143 for detailed configuration information.

Test Settings Allows you to test the Active Directory configuration using the settings you specified. See "Using the iDRAC6 Directory Service" on page 143 for details on using the Test Settings option.

Configuring and Managing Generic LDAP

iDRAC6 provides a generic solution to support Lightweight Directory Access Protocol (LDAP)-based authentication. This feature does not require any schema extension on your directory services. For information on configuring generic LDAP Directory Service, see "Generic LDAP Directory Service" on page 178.

Configuring iDRAC6 Services

NOTE: To modify these settings, you must have Configure iDRAC permission.

1Click Remote Access→ Network/Security. Click the Services tab to display the Services configuration page.

2Configure the following services, as required:

•Local Configuration — see Table 4-20

•Web server — see Table 4-21 for Web server settings

•SSH — see Table 4-22 for SSH settings

•Telnet — see Table 4-23 for Telnet settings.

•Remote RACADM — see Table 4-24 for Remote RACADM settings.

•SNMP Agent — see Table 4-25 for SNMP settings.

Configuring the iDRAC6 Using the Web Interface

73