Cisco Systems ASR 9000, A9KMOD80TR configure, end or commit, 3-18, Summary Steps, Detailed Steps

Chapter 3 Configuring General Router Features

Managing Configuration Sessions

F I N A L D R A F T — C i s c o C o n f i d e n t i a l

3.The system saves the changes to the running configuration and leaves you in configuration mode or in EXEC mode.

To remain in CONFIG mode after you commit changes, perform the following procedure.

SUMMARY STEPS

1.configure

2.Enter configuration changes.

3.end or commit

DETAILED STEPS

	Command or Action	Purpose
Step 1
	configure	Enters global configuration mode.
	Example:
	RP/0/RSP0/CPU0:router# configure
Step 2
	Enter configuration changes.	Invokes the change you enter.
Step 3
	end	Saves configuration changes.
	or	• When you issue the end command, the system prompts
	commit	you to commit changes:
		Uncommitted changes found, commit them before
	Example:	exiting(yes/no/cancel)?
	RP/0/RSP0/CPU0:router(your-config-mode)# end	[cancel]:
	or	– Entering yes saves configuration changes to the
	RP/0/RSP0/CPU0:router(your-config-mode)# commit
		running configuration file, exits the configuration
		session, and returns the router to EXEC mode.
		– Entering no exits the configuration session and
		returns the router to EXEC mode without
		committing the configuration changes.
		– Entering cancel leaves the router in the current
		configuration session without exiting or
		committing the configuration changes.
		• Use the commit command to save the configuration
		changes to the running configuration file and remain
		within the configuration session.

To make configuration changes and remain in CONFIG mode, perform the following procedure.

SUMMARY STEPS

1.configure

2.Enter configuration changes.

3.commit

	Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
3-18	OL-17502-01