Dell IDRAC6 manual 130, User States and Permissions Setting Description

•The username, password, and access permissions for a new or existing iDRAC user. Table 6-3 describes General User Settings.

•The user’s IPMI privileges. Table 6-4 describes the IPMI User Privileges for configuring the user’s LAN privileges.

•The iDRAC user privileges. Table 6-5 describes the iDRAC User Privileges.

•The iDRAC Group access permissions. Table 6-6 describes the iDRAC Group Permissions.

4When completed, click Apply Changes.

5Click the appropriate button to continue. See Table 6-7.

Table 6-1. User States and Permissions

Setting	Description
User ID	Displays a sequential list of user ID numbers. Each field
	under User ID contains one of 16 preset User ID numbers.
	This field cannot be edited.
State	Displays the login state of the user: Enabled or Disabled.
	(Disabled is the default.)
	NOTE: User 2 is enabled by default.
User Name	Displays the login name of the user. Specifies an iDRAC6
	user name with up to 16 characters. Each user must have a
	unique user name.
	NOTE: If the user name is changed, the new name will not
	appear in the user interface until the next user login.
iDRAC	Displays the group (privilege level) to which the user is
	assigned (Administrator, Operator, Read Only, or None).
LAN	Displays the IPMI LAN privilege level to which the user is
	assigned (Administrator, Operator, Read Only, or None).
Serial Port	Displays the IPMI Serial Port privilege level to which the user
	is assigned (Administrator, Operator, Read Only, or None).
Serial Over LAN	Allows or disallows the user to use IPMI Serial Over LAN.

130

Adding and Configuring iDRAC6 Users