Dell IDRAC6 manual 304, LAN Parameters Description

LAN Parameters

Press <Enter> to display the LAN Parameters submenu. When you have finished configuring the LAN parameters, press <Esc> to return to the previous menu.

Table 17-1. LAN Parameters

Item	Description
Common Settings
NIC Selection	Press <Right Arrow>, <Left Arrow >, and spacebar to switch
	between the modes.
	The available modes are Dedicated, Shared, Shared with
	Failover LOM2, and Shared with Failover All LOMs.
	These modes will allow the iDRAC6 to use the corresponding
	interface for communication to the outside world.
MAC Address	This is the non-editable MAC address of the iDRAC6 network
	interface.
VLAN Enable	Select On to enable the Virtual LAN filtering for the iDRAC6.
VLAN Id	If VLAN Enable is set to On, enter any VLAN ID value
	between 1-4094.
VLAN Priority	If VLAN Enable is set to On, select the priority of the VLAN
	between 0-7
Register iDRAC6	Select On to register the iDRAC6 name in the DNS service.
Name	Select Off if you do not want users to locate the iDRAC6 name
	in DNS.
iDRAC6 Name	If Register iDRAC Name is set to On, press <Enter> to edit
	the Current DNS iDRAC Name text field. Press <Enter>
	when you have finished editing the iDRAC6 name. Press
	<Esc> to return to the previous menu. The iDRAC6 name
	must be a valid DNS host name.

Domain Name from Select On if you want to obtain the domain name from a

DHCPDHCP service on the network. Select Off if you want to specify the domain name.

304

Using the iDRAC6 Configuration Utility