Dell IDRAC6 LCD Configuration, Collect System Inventory on Restart, 310, LCD User Configuration

Collect System Inventory on Restart

Select Enabled to allow the collection of inventory during boot. See the Dell Lifecycle Controller User Guide available on the Dell Support Website at support.dell.com/manuals for more information.

NOTE: Modifying this option restarts the server after you have saved your settings and exited from the iDRAC6 Configuration Utility.

NOTE: If you choose to restore to factory defaults, the settings for Collect System Inventory on Restart does not change.

LCD Configuration

Press <Enter> to display the LCD Configuration submenu. When you have finished configuring the LCD parameters, press <Esc> to return to the previous menu.

Table 17-2. LCD User Configuration

LCD Line 1	Press <Right Arrow>, <Left Arrow >, and spacebar to switch
	between the options.
	This feature sets the Home display on the LCD to one of the
	following options:
	Ambient Temp, Asset Tag, Host Name, iDRAC6 IPv4
	Address, iDRAC6 IPv6 Address, iDRAC6 MAC Address,
	Model Number, None, Service Tag, System Power,
	User-Defined String.
LCD User-Defined	If LCD Line 1 is set to User-Defined String, view or enter the
String	string to be displayed on the LCD.
	The string can be maximum of 62 characters long.
LCD System Power	If LCD Line 1 is set to System Power, select Watt or BTU/hr
Units	to specify the Unit to be displayed on the LCD.
LCD Ambient Temp	If LCD Line 1 is set to Ambient Temp, select Celsius or
Units	Fahrenheit to specify the Unit to be displayed on the LCD.

310

Using the iDRAC6 Configuration Utility