Additional Calibration Information
MACINTOSH Version
3.Enter the desired settings and click OK to save the settings (or Cancel to keep the previous settings).
The selected test target is sent to the printer.
Editing the Calibration Configuration
The Edit Configuration feature allows you to change the printer’s calibration configuration attributes. However, it is recommended that you use the default settings for these attributes for most operations. The settings should only be changed for the most advanced operations.
Edit Configuration consists of a set of six tabbed screens— each with related configuration attributes. There can be only one set of configuration attributes for the printer calibration application at a time. If you make any changes to one or more of the tabbed screens and then click OK to save your changes, the changes will overwrite the previous attributes used for the automated calibration.
To edit the calibration configuration:
1.From the KODAK Device Calibration screen,
September 2000 |
