Additional Calibration Information
Editing Information on the Aim Tab
The Aim tab specifies:
•whether the aims used for calibration are to be Density Aims or Lightness Aims
•whether to apply the
•which table to use if Copyright Detection is functional
The values displayed in the example are the default settings.
Attribute | Description |
|
|
|
|
Desired Aim | Indicates whether to use Density Aims or Lightness Aims for |
| calibration. Using Lightness Aims will improve both the highlights and |
| shadows of your prints. |
|
|
Apply Channel | Indicates whether or not to apply the |
Independent | the aim values. If the matrix is applied, the number of cycles required |
Matrix? | to successfully calibrate the printer should be reduced. |
|
|
Copyright | Select the table to be used. This feature is available with Gen II LED |
Detection Table | printers only. Only use this feature as instructed by Kodak. |
|
|
To edit the configuration information on the Aim tab:
1.Change the Aim information as needed.
2.If you have completed all editing of configuration information (including information on the other tabbed screens), click OK to save the changes and close the Edit Configuration screen.
NOTE: Click Cancel to cancel all changes made to the Edit Configuration screen and close the Edit Configuration screen.
3.To continue making changes to the Edit Configuration, click on another tab and make changes as needed.
September 2000 |
