Kodak 20P manual Set

		System Operating Procedures
	OCP Key/Light Descriptions
Key/Light	Key /LED	Description/Function
	Indicator Light
	Set Key	Pressing Set causes the screen to change from View mode to either
SET		Set mode, Calibrate mode, or Min Max mode. In Set mode, a device
		can be set to “ON”, “OFF” or “AUTO” or a new operating parameter
		can be entered. In Calibrate mode, an adjustment offset for the
		device can be entered. In Min Max mode, the maximum and
		minimum readings for the device can be viewed or reset.
	Up Arrow	The Up Arrow has two functions depending on the keyboard mode.
		In View mode, this key is used to scroll the viewing screen that
		displays additional devices or information. In Set or Calibrate
		modes, this key increases the displayed value.
	Down Arrow	The Down Arrow has three functions depending on the keyboard
		mode. In View mode, this key is used to scroll the viewing screen to
		display additional devices or information. In Set or Calibrate modes,
		this key decreases the displayed value. In Min Max mode, this key
		resets the values to the current measured temperature.
	On/Off Key and	Pressing On/Off turns the processor on and off. The light above
	On/Off Light	On/Off illuminates continuously when the processor is ready. If the
		chemistries are not all at their set temperature when the processor
		is on, the light blinks on and off. When the processor is off, the light
		is not illuminated.
	Time Key and	Pressing Time accesses the Time screen. The light above the key
	Time Light	illuminates when the Time screen is active.

Temperature	Pressing Temperature accesses the Temperature control screen.
Key and	The light above the key illuminates when the screen is active.
Temperature
Light

Replenishment	Pressing Replenishment accesses the Chemical Replenishment
Key and	and Wash Control screen. The light above the key illuminates when
Replenishment	the screen is active.
Light

September 2000 3-27