Maintaining the Equipment
Preventing Algae (for Wash Configuration)
Add hot water to the top rollers in the wash area of the processor to prevent algae from forming and causing chemical and transport problems.
CAUTION: Install a splash guard over the entrance area of the processor to prevent water and chemicals from entering the printer.
splash guard
top rollers
Cleaning the Crossover Assemblies and Transport Racks
WARNING: Always use two people to lift the transport rack (one person at each end.)
Remove the crossover assemblies and the transport racks and wash them in warm water. Be sure to wash the socks thoroughly using a soft bristle brush.
CAUTION: To prevent installing the transport racks in the wrong tank, remove, wash, and replace each transport rack, one at a time.
crossover assembly
sock
transport rack
September 2000 |
