System Operating Procedures
Key/Light | Key /LED | Description/Function | |
Indicator Light | |||
|
| ||
| Drive Key and | Pressing Drive accesses the drive motor control system. The light | |
| Drive Light | above the key illuminates when the Drive key is active. |
Material Key and | The Material key is used to access the Material Transport screen. | ||
Material Light | The Material key can also be used to view the processor setup | ||
| parameters, select the control strip screen, and start the control strip | ||
| procedure (see “Processing a Control Strip” on page | ||
| above the Material key illuminates when the Material Transport | ||
| screen is active. If paper is present at the feed table, the LCD | ||
| display on the OCP indicates the size of the paper currently at the | ||
| entrance of the processor or at the exit. For example: | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| NOTE: Moving dots illuminate under the size indicators to indicate |
|
|
|
|
|
|
| that paper is moving through the processor. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Reset Keys | The Reset keys are the two embossed unmarked keys below the |
|
|
|
|
| |||
|
|
|
|
|
|
| Power and Material keys. Pressing both Reset keys simultaneously |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| puts the processor in Reset mode. |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Status Messages
Status messages display on the LCD display of the operator control panel to indicate the status or current state of the processor.
September 2000 |
