System Operating Procedures
Producing Borderless Prints
To achieve borderless prints on both the front and back edges of the paper, you must set the Page Starts value to adjust the location of the image so that both edges of the image print off the paper.
NOTE: The image width should be at least 76 pixels wider than the width of the paper to ensure a borderless print.
Paper Size | Image Width in Pixels |
|
|
|
|
10 inch | 2576 |
|
|
11 inch | 2826 |
|
|
12 inch | 3076 |
|
|
20 inch | 5076 |
|
|
A4 | 3000 |
|
|
outline of the paper outline of the image
back edge
page start
front edge
If white borders are present on either the front or back edge of the print:
1.Measure the white border at both the lead (distance A) and the trail edge (distance B) and determine its average width.
2.Convert the average width of the white border to a pixel value. To do this, multiply the width by 250 and add 76.
September 2000 |
