Kodak 20P Calibration Error Codes, Diagnostics and Troubleshooting, Error Code /Status, Message

Diagnostics and Troubleshooting

Calibration Error Codes

Error	Error Code /Status	Possible Cause/Subsystem		Possible Solution
Code	Message
1	The following file is	The system is trying to access a	Close any other applications that
	locked:_filename_.	file that is currently in use.	may be accessing the file.
2	The following file is	The system is trying to access a	Change the protections on the file
	protected:_filename_.	file that is protected.	to grant access to the user.
3	The following file was not	The system was trying to access	Verify that the filename on one of
	found:_filename_.	a file that it could not find.	the configuration dialog windows is
			correct.
4	Error:_oserror_occurred	An operating system error	•	Rerun the application.
	during operation:_operation_	occurred.	• Reboot the operating system
	on file:_filename_.
5	The following file is in an	The file does not conform to the	Verify the file format.
	incorrect format:_filename_.	application specification.
6	The following file already	The system is trying to save to a	•	Delete the existing file.
	exists:_filename_.	file that already exists.	•	Change the filename.
7	There is not enough space to	The system is trying to save a file	Remove any unnecessary files to
	create:_filename_.	but there is not enough disk	increase free disk space.
		space.
8	There are too many files to	Too many files open.	Close some files and or
	open _filename_.		applications.
9	You do not have permission	The file permission is invalid.	Rerun the application.
	to open file _filename_.
10	Error copying print LUT to	Folder doesn’t exist or is read-	Modify protection on folder.
	DP2 folder (can’t open	only.
	_filename_.
11	Error creating DP2 LUT	A folder of the same name may	Change the selected folder name.
	folder	exist.
101	No response from	The device is not responding to	Verify that the device is connected
	device:_devicename_.	the system.	and on-line.
102	Device not	The system was trying to access	Verify that the device name on one
	found:_devicename_.	a device that it could not find.	of the configuration dialog
			windows is correct.
103	The following device is	The device is not ready.	Wait several minutes and try the
	indicating it is not		activity again.
	ready:_devicename_.
104	The following device is	The device is busy.	Wait several minutes and try the
	busy:_devicename_.		activity again.
105	The following device is not a	The port name in the	Change the port name in the
	TTY port:_devicename_.	configuration file does not refer to	configuration file to a valid serial
		a valid serial port.	port.

5-20 September 2000