Diagnostics and Troubleshooting
Clearing Error Messages
To clear an error or warning message from the OCP, the condition causing the error or warning must be corrected. Paper jam, drive errors and temperature errors must be cleared from the material function.
Clearing a Reset Message
If the processor is reset, the “MACHINE RESET” error message will appear on the top line of the LCD display on the processor’s OCP. Press any function key to erase the message.
If the processor is reset and the values for a function are reset to factory settings, a reset message for that function will also appear (for example: “CLOCK RESET”).
To clear a function reset message, press the function key for the function the message refers to.
LCD display
SET | MACHINE RESET |
|
function keys
September 2000 |
